Menu

crank no start

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › crank no start

  • Creator
    Topic
  • July 30, 2012 at 11:00 am #461177
    lnknprkfn312 @hotmail.comlnknprkfn312@hotmail.com
    Participant

      sounds fuel related if you can get it to run for a moment off carb cleaner. like some say use a screwdriver and hold it against each injector and listen to it as you have someone try to start it and listen for the solenoid in each injector. atleast.. that

    • Creator
      Topic
    Viewing 6 replies - 1 through 6 (of 6 total)
    • Author
      Replies
    • July 30, 2012 at 11:00 am #461179
      spelunkerdspelunkerd
      Participant

        I agree with above, sounds like a fuel problem. I would star by putting a fuel pressure gauge on the rail and measure fuel pressure, and also a vacuum gauge on a vacuum hose to be sure your engine is moving air. I would also have a close look at the servi

        July 30, 2012 at 11:00 am #461180
        lnknprkfn312 @hotmail.comlnknprkfn312@hotmail.com
        Participant

          ah yes forgot about the whole fuel delevery route. plus one of the fastest ways to check if you are getting fuel is in close to dead silence turn the key to run and listen for the whir of the fuel pump priming itself_x000D_
          _x000D_
          in fact.. this is one of ETCG’s vid

          July 30, 2012 at 11:00 am #461181
          JoshMcJoshMc
          Participant
            July 30, 2012 at 11:00 am #461182
            TaskinTaskin
            Participant

              +1 Josh. Thats the golden rule. K.I.S.S.

              July 30, 2012 at 11:00 am #461178
              JoshMcJoshMc
              Participant
                August 1, 2012 at 11:00 am #461183
                EricTheCarGuy 1EricTheCarGuy
                Keymaster

                  I’ve actually done a video on fuel pump diagnosis that might help you.

                • Author
                  Replies
                Viewing 6 replies - 1 through 6 (of 6 total)
                • You must be logged in to reply to this topic.
                Loading…