Can You Machine a Flywheel with a Brake Lathe??

The answer, yes you can. In this video I show how I use my BendPak brake lathe to machine the flywheel for my Fairmont.

There were some parts I cut out of this video that might be helpful. If the flywheel starts to chatter, I recommend taking an old brake pad and holding it on the flywheel while it’s being machined. This will help reduce the chatter for a better finish. I cut that part out because past experience has taught me that many viewers are concerned about making contact with moving parts on a machine like this. A valid concern for sure. If you’re careful, you should be fine.

Want to know more about my brake lathe?
  http://www.bendpak.com/wheel-service/brake-lathes/rl-8500.aspx

Dowel Pin Remover

Cal Van Tools 95400 In-Line Dowel Pin Puller Set, With SAE And Metric Collets, Use With Power Or Hand Tools, In Case
https://www.jbtoolsales.com/cal-van-tools-95400-in-line-dowel-pin-puller-set-with-sae-and-metric-collets-use-with-power-or-hand-tools-in-case#oid=1002_1

Camera: Brian Kast

Thanks for watching!

Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/63855-can-you-machine-a-flywheel-with-a-brake-lathe#165957

The best place for answers to your automotive questions: http://www.ericthecarguy.com

ETCG FAQ Page: http://www.ericthecarguy.com/faq

ETCG

Video Title: Can You Machine a Flywheel with a Brake Lathe?? -EricTheCarGuy Video Description: In this video I show how I use my BendPak brake lathe to machine the flywheel for my Fairmont. Thumbnail: http://www.ericthecarguy.com/images/Youtube_Thumbs/may/2016/Can-You-Machine-a-Flywheel-with-a-Brake-Lathe_lg.jpg